SamKEY download

Lihat paling bawah

– Added support for J600G BIT3 (Any KNOX)
– Added support for G570F Android 8.0 (Any KNOX)
– Added support for J600GF (Any KNOX)
– Added support for J600GT (Any KNOX) {Beta}
– Read Codes for G570F/DD has been improved and minor bugs has been fixed

Version 1.84.4

– Added support for A600F BIT3 (Any KNOX)
– Added support for A600FN BIT3 (Any KNOX)
– Added support for A720F BIT5 (Any KNOX)
– Added support for G611M BIT3 (Any KNOX)
– Fixed error(ack) for J330F, J330FN, J330G Android 8.0

Version 1.84.3

– Added support for G9600, G9650 BIT3 via ENG MODEM
– Added support for N935F BIT3
– Added support for J701M BIT4
– Added (New Method : KNOX) for G570FDD BIT1
– Added (New Method : KNOX) for N935F BIT1
– Added (New Method : KNOX) for A530F BIT1
– Added (New Method : KNOX) for A730F BIT1
– Support for G930F, G930FD has been improved & added support for newest modems

Version 1.84.2

– Added support for N960F , N960F/DS (Galaxy Note 9)
– Added support for N960N (Galaxy Note 9)
– Added support for J400G BIT2 (Any KNOX)
– Added support for J400M BIT2 (Any KNOX)
– Added New Method for A530W (Any KNOX)

Version 1.84.1

– Added support for J330F BIT3 [Android 8.0] (Any KNOX)
– Added support for J330FN BIT3 [Android 8.0] (Any KNOX)
– Added support for J330G BIT3 [Android 8.0] (Any KNOX)
– Added support for J330G BIT1 (New Method : Any KNOX)
– Read Codes for J8, S9, S9+ has been improved again
– Error Fixed : ERROR (3720) Security Calculation fail

Version 1.84.0

– Added support for G885F, G885Y, G885G, G885Y (Galaxy A9 Star)
– Added support for G8850, G8858 (Galaxy A9 Star)
– Added support for A530W BIT3 (Any KNOX)
– Added J530G BIT1, BIT2, BIT3 New Method (Any KNOX)
– Added J530GM BIT1, BIT2, BIT3 New Method (Any KNOX)
– Added J530Y BIT1, BIT2, BIT3 New Method (Any KNOX)
– Added J530YM BIT1, BIT2, BIT3 New Method (Any KNOX)
– Added J730G BIT1, BIT2, BIT3, BIT4 New Method (Any KNOX)
– Added J730GM BIT1, BIT2, BIT3, BIT4 New Method (Any KNOX)

Version 1.83.9

– Added support for J737A BIT2 (Any KNOX)
– Added support for A530F BIT3 (Any KNOX)
– Added support for J336AZ BIT2 (Any KNOX)
– Code Reading for J730F has been improved

Version 1.83.8

– Added support for A520F BIT6 (Any KNOX) <<< WORLD’S FIRST >>>
– Added support for G611M BIT2 (Any KNOX)
– Added support for SC02H New 2018 Firmwares(SC02HOMU1BR**)
– Code Reading for G892A/G892U has been improved
– Minor bugs for J810(J8 2018) has been fixed and modules improved

Version 1.83.7

– Added support for J400M (Any KNOX)
– Code Reading for S9, S9+ Qualcomm has been improved
– Code Reading for G611M, A600G has been improved

Version 1.83.6

– Added support for A520F BIT5 (Any KNOX)
– Added support for A520FZ BIT5 (Any KNOX)
– Added support for J720F BIT3 (Any KNOX)
– Added support for J720F/DD BIT3 (Any KNOX)
– Support for Xfinity S9/S9+ has been updated (New algorithm)
– Support for Qualcomm (J2, S8, S8+, Note8,…) has been updated (New algorithm)
– Fixed : ERROR (3720) on new security (Qualcomm)

Version 1.83.4

– Added support for J400G (Any KNOX)
– Added support for A600F BIT2 (Any KNOX)
– Added support for A600FN BIT2 (Any KNOX)
– Added support for J701F BIT5 (Any KNOX)
– Added support for J701F/DD BIT5 (Any KNOX)

Version 1.83.3

– Added support for A600G BIT2
– Added support for A600GN BIT2
– Added support for J730GM BIT2
– Reading Codes for J600 (Galaxy J6) has been optimized

Version 1.83.2

– Added support for J336AZ (Galaxy Sol 3 2018)
– Added support for J337A (Galaxy J3 2018)
– Added support for J337AZ (Galaxy Amp Prime 3 2018)
– Added support for J337VPP (Galaxy J3 2018)
– Added support for J737A (Galaxy J7 2018)
– Added support for J737VPP (Galaxy J7 2018)
– Minor bugs has been fixed and interface improved

Version 1.82.3

– New Qualcomm 2018 firmwares Read Code optimized
– Minor bugs has been fixed

Version 1.82.2

– Added support for G950U, G950U1 BIT5
– Added support for G955U, G955U1 BIT5
– Added support for N950U, N950U1 BIT5
– Added support for G892U BIT3
– Added support for G892A BIT3
– Fixed minor bugs in G950U/G955U BIT2

Version 1.82.0

– Automatic Unlock now works perfect on PUK/Freeze
– No more need to write ENG Modem
– No more PUK/Freeze : 00000000
– No more (ERROR!) after read codes
– Added New algo MSM Crypto Engine for : A605F, A605FN, A605G, A605GN, A6050, A6058
– Added New algo MSM Crypto Engine for : J250F, J250G, J250Y, J250M
– Added New algo MSM Crypto Engine for : SC02J, SC03J , SC01K
– Added New algo MSM Crypto Engine for : G950U, G950U1, G950W, G9500, G9508
– Added New algo MSM Crypto Engine for : G955U, G955U1, G955W, G9550, G9558
– Added New algo MSM Crypto Engine for : N950U, N950U1, N950W
– Added New algo MSM Crypto Engine for : G892U, G892A
– Added New algo MSM Crypto Engine for : G930A, G930AZ
– Added New algo MSM Crypto Engine for : G935A, G935AZ
– Added New algo MSM Crypto Engine for : G891A
– Added New algo MSM Crypto Engine for : J327VPP
– Added New algo MSM Crypto Engine for : J727VPP
– Added New algo MSM Crypto Engine for : C701F
– Added support for J600G BIT2
– Added support for T377A BIT3
– All errors for J250F, J250G BIT2 has been fixed

Version 1.81.1

– Added support for J810F, J810FD Galaxy J8 2018
– Added support for J810G, J810GF Galaxy J8 2018
– Added support for J810Y Galaxy J8 2018
– Added support for J810M Galaxy J8 2018
– Added support for J400F BIT2 (Any KNOX)
– Added support for J720F BIT2 (Any KNOX)
– Added support for Xfinity S9 / S9+ (beta)
– Fixed errors with G9600 / G9650 (beta)
– Read Codes for new S9 / S9+ series has been improved

Version 1.80.7

– Added support for G570M BIT2, BIT3 (New Method : Any KNOX)
– Added support for A720F BIT4 (Any KNOX)
– Read Codes for Exynos series has been improved

Version 1.80.6

– Added support for G965F BIT2
– Added support for G570Y BIT2

Version 1.80.5

– Added support for N950F, N950FD BIT4 (Any KNOX)
– Added support for A600G, A600GD (Any KNOX)
– Added support for A600GN (Any KNOX)
– Fixed minor bug : ERROR(1069)

Version 1.80.3

– Added support for G960F, G960FD BIT2
– Added support for G950F, G950FD BIT3 (New Method : Any KNOX)
– Added support for G955F, G955FD BIT3 (New Method : Any KNOX)
– Added support for A320FL BIT2 (New Method : Any KNOX)
– Added support for G935F, G935FD BIT2 (New Method : Any KNOX)
– Added support for T585 BIT2, BIT3 (New Method : Any KNOX)
– Automatic Unlock has been improved

Version 1.80.2

– Added New Method support for J330F (J330F/DS) (Any KNOX)
– Added New Method support for J330FN (Any KNOX)
– Added New Method support for A520W (Any KNOX)
– Added New Method support for A520L (Any KNOX)
– Added New Method support for A520S (Any KNOX)
– Added New Method support for A520K (Any KNOX)
– Automatic Unlock option enabled by default

Version 1.80.1

– Added support for J400F, J400F/DS Galaxy J4 (Any KNOX)
– Added New Method support for J330G BIT2, BIT3 (Any KNOX)
– Added New Method support for A520F BIT3 (Any KNOX)

Version 1.80.0

* We are proud to give you EXCLUSIVE WORLD’S FIRST UPDATE
– Added Automatic Direct Unlock option for ALL New Exynos/Qualcomm
– FULL Support for ALL J250F/G/Y BIT2 via Automatic Direct Unlock
– FULL Support for ALL A6+ via Automatic Direct Unlock
– FULL Support for ALL J327VPP/J727VPP BIT2 via Automatic Direct Unlock
– FULL Support for ALL S8/S8+/S8 Active/Note8 NEW VERSIONS via Automatic Direct Unlock
– FULL Support for ALL S7/S7edge/S7 Active NEW VERSIONS via Automatic Direct Unlock
– FULL Support for ALL SC02J/SC03J/SC01K NEW VERSIONS via Automatic Direct Unlock
– Added support for G611FF, G611FF/DS (Any KNOX)
– Added support for J710GN BIT4 (Any KNOX)

Version 1.77.2

– Added support for A605F {Galaxy A6+}
– Added support for A605FD (A605F/DS) {Galaxy A6+}
– Added support for A605FN, A605FN/DS {Galaxy A6+}
– Added support for A605G {Galaxy A6+}
– Added support for A605GN {Galaxy A6+}
– Added support for A6050, A6058 {Galaxy A6+}
– Added support for J250Y {Galaxy J2 Pro}
– Added support for G930W8 BIT3 (Any KNOX : New Method)
– Added support for G935W8 BIT3 (Any KNOX : New Method)
– Added support for A320F, A320FD BIT2 (Any KNOX : New Method)
– Added support for A310F, A310FD BIT2, BIT3, BIT4 (Any KNOX : New Method)
– Added support for A310M BIT2 (Any KNOX : New Method)
– Added support for A310Y BIT2 (Any KNOX : New Method)
– Added support for unknown security J250F, J250G New BIT2
– Added support for unknown security J327VPP, J727VPP New BIT2
– Improved overall process for New Qualcomm 2018 firmwares
– Fixed problems with G930A, G935A, G891A New 2018 firmwares
– Fixed problems with G892A, G892U New 2018 firmwares

Version 1.76.4

– Added support for J600G (Any KNOX)
– Added support for G611M (Any KNOX)
– Added support for J530G BIT1, BIT2 (Any KNOX : New Method)
– Added support for G930F, G930FD BIT2 (Any KNOX : New Method)

Version 1.76.2

– Bug fix : A600FN (Error > Please upgrade firmware)
– New Qualcomm (MSM) Code Reading has been improved

Version 1.76.1

– Added support for A600F, A600FD (Galaxy A6 2018) – Any KNOX
– Added support for A600FN, A600FN/DS (Galaxy A6 2018) – Any KNOX
– Added support for J600F, J600FD (Galaxy J6 2018) – Any KNOX
– Added support for J600FN, J600FN/DS (Galaxy J6 2018) – Any KNOX
– Added support for J720F, J720FD (Galaxy J7 Duo) – Any KNOX
– Added support for G955F, G955FD BIT2 – Any KNOX
– Added support for A320F, A320FD BIT3 – Any KNOX
– Added support for J710F, J710FD BIT4, BIT5 – Any KNOX
– Added support for G930A, G930AZ (New 2018 firmwares) – Beta
– Added support for G935A, G935AZ (New 2018 firmwares) – Beta
– Added support for C701F (New 2018 firmwares) – Beta
– Added support for J200G, J200GD BIT2(New 2018 firmwares)
– Improved support for J250, J327VPP, J727VPP BIT2 – still Beta

Version 1.75.5

– Added support for J701F, J701FD {BIT3, BIT4} Any Knox
– Added support for N935F, N935FD {BIT2} Any Knox
– Added support for new versions : S8,S8+,Note8,S8-Active,SC02J,SC03J,SC01K via ENG Modem
– Fixed support for G955F (New method)
– Fixed support for reading codes via Eng Modem (v1.75.5)

Version 1.75.2

– Added support for G960F, G960FD Galaxy S9 (Exynos)
– Added support for G965F, G965FD Galaxy S9+ (Exynos)
– Added support for J730F, J730FD {BIT2} (Any Knox)
– Added support for A520F, A520FD {BIT4} (Any Knox)
– Added support for A720F, A720FD {BIT2, BIT3} (Any Knox)
– Added support for G611F, G611FD (Any Knox)
– Added support for G950F, G950FD {BIT1, BIT2} (Any Knox)
– Added support for G955F, G955FD {BIT1} (Any Knox)
– Added support for N950F, N950FD {BIT3} (Any Knox)
– Added support for A730F, A730FD {BIT2} (Any Knox)
– Added support for A530F, A530FD {BIT1, BIT2} (Any Knox)
– Added support for J730GM {BIT2, BIT3} (Any Knox)
– Added support for J530F, J530FD {BIT2} (Any Knox)
– Fixed bug (SECURITY_FAIL) Exynos (v1.75.2)

Version 1.74.6

– Fixed minor bug on new 2018 versions of G892U, G892A(Error 0x00)
– Some internal improvements has been applied

Version 1.74.5

– Added support for G891A New 2018 firmwares(BRC,BRD,…)
– Added almost ALL unknown security for new 2018 firmwares : G950U, G955U, N950U, G892A, G892U
– Fixed problems with new 2018 firmwares : G950U1, G955U1, N950U1
– Fixed problems with new 2018 firmwares : J250(x), J727VPP, J327VPP

Version 1.74.3

– Added support for G950U BIT3 and Latest BIT2 (CRC version)
– Added support for G950U1 BIT3
– Added support for G950W BIT3
– Added support for G955U BIT3 and Latest BIT2 (CRC version)
– Added support for G955U1 BIT3
– Added support for G955W BIT3
– Added support for N950U BIT4 and Latest BIT3 (CRC version)
– Added support for N950U1 BIT4 and Latest BIT3 (CRC verrsion)
– Added support for N950W BIT4
– Added support for G892U and G892A Latest 2018 versions
– Added support for G9500 and G9508 Latest 2018 versions (CRD & CRE versions)
– Added support for G9550 and G9558 Latest 2018 versions (CRD & CRE versions)
– Fixed support for SC02J , SC03J , SC01K Latest 2018 versions
– Fixed support for J250, J327VPP, J727VPP BIT2 Latest 2018 versions

Version 1.74.0

– Added support SC01K new 2018 firmwares (beta)
– Added support SC02J new 2018 firmwares (beta)
– Added support SC03J new 2018 firmwares (beta)
– Added support for unknown security : G950W / G955W / N950W
– Added support for unknown security : G950U / G955U / N950U / G892A / G892U

Version 1.73.8

– Added support for J327VPP BIT2 (J327VPPVRU2ARC1, and future BIT2 firmwares)
​- Added support for J250G BIT2
– Added support for J250M BIT2
– Added support for J250N
– Fixed minor bug in J250F/J727VPP BIT2 reading codes

Version 1.73.6

– Added support for J250F BIT2 (New 2018 firmwares)
*** J250FXWU2ARC6, J250FXXU2ARD3, J250FXWU2ARD7, and future BIT2 releases
– Added support for J727VPP BIT2 (New 2018 firmwares)
*** J727VPPVRS2ARC1 and future BIT2 releases
– Fixed ERROR (Calculating…FAIL) sometime happens while reading G9650

Version 1.73.5

– Added NEW method for read codes G950U, G950W, G950U1 for new firmwares
– Added NEW method for read codes G955U, G955W, G955U1 for new firmwares
– Added NEW method for read codes N950U, N950U1, N950W for new firmwares
– Added NEW method for read codes G892U, G892A for new firmwares
– Added NEW Option : Skip Notification suitable for bulk users

Version 1.73.3

– Added support for S9 / S9+ X-finity
– Added new method for G9650 / G9600 / G9608 (via UPLOAD MODE)
– Added support for J250F Latest 2018 firmwares
– All Android 8.0 series code reading has been improved.

Version 1.73.1

– Added S9/S9+ bulk orders support for bulk users
– Fixed bug with G390F New 2018 Firmwares
– Fixed minor bug CHECK_FAIL on new android 8.0
– Some other minor bugs has been fixed

Version 1.73.0

– Added support for G960U (Galaxy S9)
– Added support for G960U1 (Galaxy S9)
– Added support for G960W (Galaxy S9)
– Added support for G9600 (Galaxy S9)
– Added support for G9608 (Galaxy S9)
– Added support for G965U (Galaxy S9+)
– Added support for G965U1 (Galaxy S9+)
– Added support for G965W (Galaxy S9+)
– Added support for G9650 (Galaxy S9+)

Version 1.72.3

– Added support for J727VPP Latest 2018 firmwares
– Added support for G530M New firmware versions

Version 1.72.2

– Improved read codes for S8/S8+/Note8 Android 8.0
– Added support for J321AZ new firmware versions
– Added support for J320A / J320AZ new firmware versions
– Added support for J320W8 new firmware versions
– Added support for J320M

Version 1.72.0

– Added support for Android 8.0
S8,S8+,Note8,S8 Active,and all other Qualcomms with Android 8.0 are supported now
No need to downgrade phones with (Android 8.0.0) anymore…
– Server calculation optimized
– Added support for new firmware versions of SC04J
– Fixed SECURITY_ERROR on J327W

Version 1.71.7

– Added support for J327W BIT2 (New 2018 firmware)
– Added support for J701MT BIT3 (New 2018 firmware)
– Added support for G925W8 BIT6 (New 2018 firmware)
– Minor bugs has beed fixed

Version 1.71.5

– Added support for G610F New 2018 firmware
– Added support for G610FD New 2018 firmware
– Added support for G610F/DS New 2018 firmware
– Added support for T337A, T337W New firmwares
– Fixed ERROR(1028) J330 KNOX1

Version 1.71.4

– Added support for G920I BIT3 (New 2018 firmware)
– Added support for G925I BIT3 (New 2018 firmware)
– Added NEW Direct method for J326AZ BIT2 (New 2018 firmware)
– Improved J330(x) KNOX1 Read Codes process

Version 1.71.2

ALL WORLD’S FIRST
– Added support for SM-W2018
– Added support for T395 BIT2 (New 2018 firmware)
– Added support for T395N BIT2 (New 2018 firmware)
– Minor bugs has been fixed.

Version 1.71.1

– WORLD’S FIRST : Added support for J120A BIT5 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120AZ BIT5 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120F, J120FD BIT2 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120G, J120GD BIT1 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120M, J120MD BIT2 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120FZ BIT2 (New 2018 Firmwares)
– WORLD’S FIRST : Added support for J120W (WARRANTY VOID=1 for BIT1 & BIT2)
– WORLD’S FIRST : Added support for J120A (WARRANTY VOID=1 for BIT1 & BIT2)
– WORLD’S FIRST : Added support for J120AZ (WARRANTY VOID=1 for BIT1 & BIT2)
– WORLD’S FIRST : Added support for J710FQ (WARRANTY VOID=1 for BIT1)
– WORLD’S FIRST : Added support for J710FN (WARRANTY VOID=1 for BIT1)
– WORLD’S FIRST : Added support for J710GN (WARRANTY VOID=1 for BIT1 & BIT2)
– WORLD’S FIRST : Added support for J7108 (WARRANTY VOID=1 for BIT1)
– WORLD’S FIRST : Added support for J710K (WARRANTY VOID=1 for BIT1)
– WORLD’S FIRST : Added support for T3777 (WARRANTY VOID=1 for BIT1)
– Added support for J120H
– Added support for J120F,J120FD (WARRANTY VOID=1 for BIT1)
– Added support for J120FN (WARRANTY VOID=1 for BIT1)
– Added support for J120FZ (WARRANTY VOID=1 for BIT1)
– Added support for J120G,J120GD (WARRANTY VOID=1 for BIT1)
– Added support for J120M,J120MD (WARRANTY VOID=1 for BIT1)
– Fixed bug : Reading Codes G920W8 BIT6 (new 2018 firmware) has been fixed

Version 1.70.7

– WORLD’S FIRST : Added support for J727A BIT3 (New 2018 firmware)
– WORLD’S FIRST : Added support for J727U BIT3 (New 2018 firmware)
– WORLD’S FIRST : Added New Method for J327AZ BIT3 (New 2018 firmware)

Version 1.70.6

MOSTLY WORLD’S FIRST
– Added support for N950W BIT3 (New 2018 firmware)
– Added support for J701MT BIT2 (New 2018 firmware)
– Added support for G930F/FD BIT1 (New 2018 firmware)
– Added support for G935F/FD BIT1 (New 2018 firmware)
– Added support for A720F BIT2 (New 2018 firmware)
– Added support for G935S Warranty VOID=1 (KNOX:1)

Version 1.70.5

MOSTLY WORLD’S FIRST
– Added support for T715 Galaxy Tab S2 8.0 (new 2018 firmwares supported) VOID 1 supported
– Added support for T715C Galaxy Tab S2 8.0 (new 2018 firmwares supported) VOID 1 supported
– Added support for T715Y Galaxy Tab S2 8.0 (new 2018 firmwares supported) VOID 1 supported
– Added support for T715M Galaxy Tab S2 8.0 (new 2018 firmwares supported) VOID 1 supported
– Added support for T715N0 Galaxy Tab S2 8.0 (new 2018 firmwares supported) VOID 1 supported
– Added support for N920A BIT5 (new 2018 firmware)
– Added support for J530FM BIT3 (new 2018 firmware)
– Added support for J530G BIT2 (new 2018 firmware)
– Added support for J530GD BIT2 (new 2018 firmware)
– Added support for J530GM BIT2 (new 2018 firmware)

Version 1.70.1

– WORLD’S FIRST : Added support for G390F BIT2 (New 2018 firmware)
– WORLD’S FIRST : Added support for J710FN BIT4 (New 2018 firmware)
– WORLD’S FIRST : Added support for A510F, A510FD BIT5 (New 2018 firmware)
– WORLD’S FIRST : Added support for A310F, A310FD BIT4 (New 2018 firmware)

Version 1.70.0

– WORLD’S FIRST : Added support for A530F, A530FD ALL NEW 2018 FIRMWARES > BIT1 & BIT2
– WORLD’S FIRST : Added support for A730F, A730FD ALL NEW 2018 FIRMWARES > BIT1 & BIT2
– WORLD’S FIRST : Added support for A720F, A720FD BIT3 (New 2018 Firmware)
– WORLD’S FIRST : Added support for J710GN BIT4 (New 2018 Firmware)

Version 1.67.6

– Added support for G920F New 2018 Firmwares
– Added support for G920FD New 2018 Firmware
– Added support for G920FQ New 2018 Firmware
– Added support for G925F New 2018 Firmwares
– Added support for G925FD New 2018 Firmware
– Added support for G925FQ New 2018 Firmware
NOTICE : WARRANTY VOID (KNOX) Must be 0 for all above phones

Version 1.67.5

– Added support for J327A BIT2 2018 new direct method
– Fixed bug : J330 WARRANTY VOID=1 (Run as administator Error Fixed)
– Fixed bug : Reading Codes SC02G (TIMEOUT Error Fixed)

Version 1.67.4

– Added support for G920AZ BIT7 (New 2018 Firmware)
– Added support for G903F, G903W, G903M, G903M/DS (Any KNOX, Any version)

Version 1.67.3

– Added support for J730FM BIT2 (New 2018 Firmware)
– Added support for J330FN BIT3 (New 2018 Firmware)
– Fixed TIMEOUT ERROR for A520W BIT2 (New 2018 Firmware)
– User interface has been improved

Version 1.67.0

– Added support for G950F Android 8.0 (New 2018 Firmware)
– Added support for G950FD Android 8.0 (New 2018 Firmware)
– Added support for G955F Android 8.0 (New 2018 Firmware)
– Added support for G955FD Android 8.0 (New 2018 Firmware)
– Added support for A520W BIT2 (New 2018 Firmware)
– Added support for A320FL BIT2 (New 2018 Firmware)
– Added support for G570M BIT2 (New 2018 Firmware)
– Added support for G928F(FD) BIT4 (New 2018 Firmware)
– Added support for N920W8 BIT5 (New 2018 Firmware)
– Added support for J330FD BIT3 (New 2018 Firmware)
– Added support for J530FD BIT2 (New 2018 Firmware)
– Added support for J701MD BIT2 (New 2018 Firmware)
– Added support for A320FD BIT3 (New 2018 Firmware)
– Added support for N950FD BIT3 (New 2018 Firmware)
– Added some unknown type of lock data for Note8 2018 firmware
– Optimized reading data for new 2018 firmwares

Version 1.66.9

-Added support for : J530F BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : A320F BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for : J710MN BIT4 (Security Patch 2018) WORLD’S FIRST
-Added support for : J701M BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : G920W8 BIT6 (Security Patch 2018) WORLD’S FIRST
-Added support for :G928W8 BIT5 (Security Patch 2018) WORLD’S FIRST
-Added support for : N950U BIT3 (N950USQU3BRA6)

Version 1.66.8

– G360M, G530M, J327A (2018 fw), J327AZ (2018 fw) Reading Codes bugs fixed.

Version 1.66.7

-Added support for : N950U BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for : J327A BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : J327AZ BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : J326A BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : J701F BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for :J701FD BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for : G930F BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : G930FD BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : G930W8 BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for : G935F BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : G935FD BIT2 (Security Patch 2018) WORLD’S FIRST
-Added support for : G935W8 BIT3 (Security Patch 2018) WORLD’S FIRST
-Added support for : J710F BIT4 (Security Patch 2018) WORLD’S FIRST
-Added support for : J710FD BIT4 (Security Patch 2018) WORLD’S FIRST
-Added support for : G890A BIT7 (Security Patch 2018) WORLD’S FIRST
-Added support for : G920A BIT7 (Security Patch 2018) WORLD’S FIRST
-Added support for : G925A BIT7 (Security Patch 2018) WORLD’S FIRST
-Added support for : G928A BIT5 (Security Patch 2018) WORLD’S FIRST
-Added new option (Advanced section) : J3 2017 (Knox:1)
(For Reading Codes KNOX1 Without ROOT All J3 2017 EXYNOS Series)

Version 1.65.1

– Added support for J330F NEW BIT3 2018 version

Version 1.65.0

– Added support for N950F Galaxy Note 8 NEW BIT3 2018 version

Version 1.64.0

– Added support for new firmware ver: SM-G930F / SM-G935F (Knox1 Supported)
– Added support for SM-N930F, SM-N930K, SM-N930L, SM-N930S (Knox1 Supported)
– Added support for SM-N935F, SM-N935K, SM-N935L, SM-N935S (Knox0 Only)
– Added support for SM-G930S, SM-G935S
– Added support for SM-G530FZ, SM-J500FN, SM-A300FU, SM-A300YZ
– Added support for SM-A500FU, SM-A500YZ, SM-A500F1
– Bug fixed : Read Codes from SM-G390F error (SECURITY_ERROR)

Version 1.63.7

– Fixed bug in Reading zero codes J327VPP (very rare case)

Version 1.63.6

– Added support for SM-G900A, SM-G900AZ
– Added support for SM-G900T, SM-G900T1, SM-G900T3
– Added support for SM-G860, SM-G860P
– Added support for SM-G313H, SM-G313HN, SM-G313HU, SM-G313HZ
– Added support for SM-G313M, SM-G313ML, SM-G313MU, SM-G313MY
– Added support for SM-G316H, SM-G316HU
– Added support for SM-G316M, SM-G316ML, SM-G316MY
– Added support for SM-G318H, SM-G318HU, SM-G318HZ
– Added support for SM-G318M, SM-G318ML, SM-G318MZ
– Added support for SM-G350E
– Added support for SM-G355H, SM-G355HN
– Added support for SM-G355M, SM-G355W
– Added support for SM-G360H, SM-G360HU
– Added support for SM-G361H, SM-G361HU
– Added support for SM-G850A, SM-G850W
– Added support for SM-G8508, SM-G8508S

Version 1.63.5

– After adding Galaxy A8/A8+ 2018, there is no more new to add…
– So we decide to add some old models … 🙂
– Note : Many of these are still world’s first !!!
– Added support for 403SC
– Added support for SM-T237
– Added support for SM-T321
– Added support for SM-T325
– Added support for SM-T335, SM-T335L, SM-T335K
– Added support for SM-T337, SM-T337A, SM-T337W
– Added support for SM-T365, SM-T365M, SM-T365Y, SM-T365N, SM-T365F0
– Added support for SM-T385, SM-T385C, SM-T385N, SM-T385D, SM-T385M
– Added support for SM-T525
– Added support for SM-T535
– Added support for SM-T567
– Added support for SM-T587
– Added support for SM-T818, SM-T818A, SM-T818T, SM-T818V, SM-T818W
– Added support for SM-T819, SM-T819C, SM-T819Y
– Added support for SM-T825, SM-T825C, SM-T825Y
– Added support for SM-T827
– Added support for SM-T905

Version 1.63.0

– Added support for SM-J3119S
– Added support for SM-T537A
– Added support for SM-T355, SM-T355C, SM-T355Y
– Added support for SM-T357A, SM-T357W
– Added support for SM-T555, SM-T555C, SM-T555Y
– Added support for SM-T719, SM-T719C, SM-T719Y
– Added support for SM-P605, SM-P605M
– Added support for SM-P605L, SM-P605K, SM-P605S
– Added support for SM-P555, SM-P555C, SM-P555M, SM-P555Y
– Added support for SM-P555N, SM-P555K, SM-P555L, SM-P555S
– Added support for SM-P355, SM-P355C, SM-P355M, SM-P355Y
– Added support for SM-P355B, SM-P355N, SM-P355K

Version 1.62.0

– Added support for SM-A530W (World’s First)
– Added support for SM-J250M (World’s First)
– Added support for SM-A530F, SM-A530F/DS
– Added support for SM-A730F, SM-A730F/DS
– Added support for SM-J250G

Version 1.61.0

-Added support for SM-J250F
-And here we added some OLD phones :
-Added support for SM-G900F, SM-G900M, SM-G900I, SM-G900L (Galaxy S5)
-Added support for SM-G900FD, SM-G900MD (Galaxy S5 DOUS)
-Added support for SM-G9006W, SM-G9008W, SM-G9009W, SM-G9009D
-Fixed ‘Run as admin’ issue in some PC

Version 1.56.0

-Added REAL WORKING support for SM-G925F, SM-G925I (World’s First)
-Added REAL WORKING support for SM-G928F, SM-G928I (World’s First)
-Fixed bug with SM-G920F, SM-G920I (ERROR during Code Read)
-Added support for SM-G890A (Galaxy S6 Active)
Notice : REAL WORKING, and WORLD’s FIRST direct read codes WITHOUT ROOT for G92xF, G92xI
Notice : WARRANTY VOID (KNOX) must be 0 for SM-G920(x),SM-G925(x),SM-G928(x)

Version 1.55.0

-Added support for Special Australian region lock (SM-J320ZN new versions, etc…)
-Added support for SM-G920F, SM-G920I, SM-G920K, SM-G920L, SM-G920S
-Added support for SM-G920A, SM-G920AZ, SM-G920W8
-Added support for SM-G925A, SM-G925K, SM-G925L, SM-G925S, SM-G925W8
-Added support for SM-G928A, SM-G928C, SM-G928G, SM-G928W8
-Added support for SM-G928K, SM-G928L, SM-G928S, SM-G928N0
-Added support for SM-G9287, SM-G9287C
-Added support for SM-N920F, SM-N920K, SM-N920L, SM-N920S, SM-N920G, SM-N920I, SM-N920W8
-Added support for SM-N9208
-Added support for SM-A310M, SM-A310H, SM-A310MD, SM-A310N0, SM-A310Y
-Added support for SM-A5108, SM-A7108
-Added support for SM-A510M, SM-A510MD, SM-A510H, SM-A510K, SM-A510L, SM-A510S, SM-A510Y
-Added support for SM-A710M, SM-A710MD, SM-A710H, SM-A710K, SM-A710L, SM-A710S, SM-A710Y
-Updated support for all new versions : SM-N920A
-Updated support for all new versions + WARRANTY VOID:1 (Knox=1) : SM-N920C, SM-N920CD
-Updated support for all new versions : SM-A310F, SM-A310FD
-Updated support for all new versions : SM-A510F, SM-A510FD
-Updated support for all new versions : SM-A710F, SM-A710FD
-Automatic ‘Run as administrator’ implemented
-Minor bug fixed > History was not showing freeze code
-Removed support for SM-S120VL, SM-S727VL, SM-S327VL because:
* Those phones are not asking for Unlock Code, so it’s useless to Read Codes
* S120VL,S727VL,S327VL (TracFone) will be added to SamKEY TMO Edition soon!

Version 1.53.2

-Added support for SM-T377A, SM-T377W all WARRANTY VOIDS/KNOX (0/1) (World’s First)
-Added supprot for SM-G610Y
-Added support for SM-J326AZ, SM-J327A, SM-J327AZ with WARRANTY VOID:1 (knox:1)

Version 1.53.0

-New EXYNOS(SHANNON) series now using 3 Credits!!! (before was 4)
-Improved/optimized new EXYNOS(SHANNON) CP reading procedure
-Fixed bug for SM-J327U reading zero codes.
-Fixed error ‘Invalid account…’ with some special passwords

Version 1.52.5

-Added support for SM-T585, SM-T585C, SM-T585N0, SM-T587 Latest Security Patch 2017(WORLD’s FIRST)
-Added support for SM-J710F, SM-J710FN, SM-J710FQ Latest Security Patch 2017 (WORLD’s FIRST)
-Added support for SM-J710GN, SM-J710K, SM-J710MN Latest Security Patch 2017 (WORLD’s FIRST)
-Added support for SM-G570F WARRANTY VOID:1 WithOUT ROOT Latest Security Patch 2017(WORLD’s FIRST)
-Added support for SM-G570M WARRANTY VOID:1 WithOUT ROOT Latest Security Patch 2017(WORLD’s FIRST)
-Added support for SM-G570Y WARRANTY VOID:1 WithOUT ROOT Latest Security Patch 2017(WORLD’s FIRST)
-Added support for SM-G610M WARRANTY VOID:1 WithOUT ROOT Latest Security Patch 2017(WORLD’s FIRST)
-Added support for SM-J330(x) WARRANTY VOID:1 newest fw version With ROOT (WORLD’s FIRST)
-Fixed bug in reading zero codes SM-J727A

Version 1.52.0

-Added support for SM-J330F, SM-J330F(x) with WARRANTY VOID:1 (WORLD’s FIRST)
-Added support for SM-J330G, SM-J330G(x), SM-J330L, SM-J330N with WARRANTY VOID:1 (WORLD’s FIRST)
-Added support for SM-P585, SM-P585M, SM-P585N0, SM-P585Y (Galaxy Tab A)
-Added support for SM-T395, SM-T395N
-Added support for SM-G390F, SM-G390Y, SM-G390W
-Added support for SM-J701F, SM-J701M, SM-J701MT
-Added support for SM-P587
-Added support for SM-P588C
-Added support for SM-N9500, SM-N9508
-Added support for SM-G9558
-Added support for SM-N950W
-Added support for SCV37

Version 1.50

-NEW EXYNOS (SHANNON) Series Direct Read Code (4 Credits for 1 phone)

(1.50.2)
-Added support for SM-G950F, SM-G950FD, SM-G950N (Galaxy S8)
-Added support for SM-G955F, SM-G955FD, SM-G955N (Galaxy S8+)
-Added support for SM-N950F, SM-N950FD, SM-N950N (Galaxy Note8)
-Added support for SM-A320F, SM-A320FD, SM-A320FL, SM-A320Y
-Added support for SM-A520F, SM-A520FD, SM-A520K, SM-A520L, SM-A520S, SM-A520W
-Added support for SM-A720F, SM-A720FD, SM-A720S
-Added support for SM-J327A, SM-J327AZ, SM-J327U, SM-J327W
-Added support for SM-J727A, SM-J727AZ, SM-J727S, SM-J727U
-Added support for SM-J330F, SM-J330FD, SM-J330FN, SM-J330G, SM-J330L, SM-J330N
-Added support for SM-J530F, SM-J530F(x), SM-J530K, SM-J530G(x), SM-J530L, SM-J530S, SM-J530Y(x)
-Added support for SM-J730F, SM-J730FD, SM-J730FN, SM-J730FM, SM-J730G, SM-J730GM, SM-J730K

(v1.50.3)
-Fixed bug : SM-J327A / SM-J327AZ (read zero codes)
-Added support for SC04J
-Added support for SM-J326AZ
-Added support for SM-A500W

Version 1.43.6

-Added support for SM-N930W8, SM-N930R(4/6/7)
-Fixed minor bug for SM-J510H new fw versions.
-Improved old Japanese series engine.

Version 1.43.1

-Implemented calculate engine for NEW EXYNOS 2017 :
* Added SM-G570F Read Codes without ROOT (World’s First)
* Added SM-G570M Read Codes without ROOT (World’s First)
* Added SM-G570Y Read Codes without ROOT (World’s First)
* Added SM-G610M Read Codes without ROOT (World’s First)
-Added support for new versions of SM-J500H
-Added ‘Get Information’ service (Get carrier info by IMEI instant)
-User interface improved.
-Some internal processes improved.

Version 1.42

– Fixed bug : calculate 01234567 code in few cases for New FW version (G950USQU1AQGL)
– Fixed bug : calculate 00000000 code in few cases for Old series A300M,J500M,J510MN,G530M,G530B
– Improved communication with phone.

Version 1.40.1

-Added support for some old phones : SM-G915V, SM-G915R4, SM-G915G
-Fixed minor bug in some old firmware for reading codes from SM-G530 / SM-J510
-Improved UPLOAD MODE transfering.

Version 1.37.7

– Added support for Latest FW (G935FXXU1DQHD) SM-G935F
– Memory reading speed improved.
– Fixed minor bugs.

Version 1.37.5

– Added support for Latest FW versions of SM-N950(x)
– Added some old phones : SM-G915V, SM-G915R4, SM-G915G
– Some security updates applied.

Version 1.37.0

– Added support for Japanese Note8 > SC-01K (WORLD’s FIRST)
– Added support for : SM-G7106, SM-G7108, SM-G7108V, SM-G7109
– Added support for : SM-G9208, SM-G9209, SM-G9250, SM-G9280
– Added support for : SM-N9150, SM-G720A, SM-G720N0, SM-N9200
– Added support for : SM-P907A, SM-P905V, SM-P905F0, SM-P905M
– Added support for : SM-G870F, SM-G870W
– Added support for : SM-S320VL, SM-S327VL, SM-S820L
– Added support for : SM-S120VL, SM-S727VL, SM-S978L
– Added support for : SM-J3109, SM-J3110 , SM-J7109
– Added support for : SM-G920V, SM-G920P, SM-G920Rx
– Added support for : SM-G925V, SM-G925P, SM-G925Rx, SM-G928P, SM-G928Rx
– Added support for some Old phones : SM-G710, SM-S907VL, SM-S920L, SM-S906L
– Added support for some Old phones : G3502L, G3502T, G3508J, SM-G357FZ
– Added support for some Old phones : G3509I, G3518, G3559, G3586V, G3589W
– Auto-Reboot after RAM reading has been fixed for new MSM

Version 1.36.4

– Added support for SM-G1650 (SAMSUNG Flip Phone)
– Added support for SM-C900X
– Added support for SM-C501X
– Added support for SC-01J, SC-01H, SC-02F, SC-02G
– Added support for old Japanese series : SC-05G, SC-03G, SC-T21
– Added some old phones : SM-G7202, SM-G9198, G360V, G360R6
– Added support for SM-G930R4, SM-G930P, SM-G930R6, SM-G930R7, SM-G930T, SM-G930T1
– Added support for SM-G530FQ, SM-G530R4, SM-G530R7, SM-G530MU

Version 1.36.2

– Added support for some old series : SM-G870A, SM-J320R4, SM-G935R4
– Added support for Latest fw version : SM-J100VPP

Version 1.36.0

– Added ‘History’ function
– Added Manual switch to UPLOAD MODE in case of error in auto-switch
– Added support for newest firmware (KEU1AQG3) SM-W2017
– Added support for old Qualcomm phones:
* SM-G386F, SM-G386T, SM-G386T1, SM-G386U, SM-G386W, SM-G360T
* SM-G360A, SM-G3608, SM-G360F, SM-G360M, SM-G360H, SM-G360HU
* SM-G360T1, SM-G360P, SM-G360G, SM-G360GY, SM-G360FY, SM-G3609
* SM-G3606, SM-G5306, SM-G5308, SM-G5309, SM-G530A, SM-G530W
* SM-G600F, SM-G600FY, SM-G600S, SM-G6000, SM-G750, SM-G750
* SM-G800F, SM-G800H, SM-G800HQ, SM-G800M, SM-G800Y, SM-G800R4
* SM-G7200, SM-G5700, SM-G7105, SM-G7102, SM-G9200, SM-E7000
* SM-J7008, SM-A3000, SM-A3009, SM-A5009, SM-A7009, SM-G7509
* SM-A300F, SM-A300FN, SM-A300H, SM-A300M, SM-A300Y, SM-A300G
* SM-E500F, SM-E500H, SM-E500Y, SM-E500M, SM-E700F, SM-E700H
* SM-E700M, SM-E7009, SM-G7508
– Minor bugs fixed

Version 1.35.3

– Added support for SM-N950U, SM-N950U1, SM-N950UX : Galaxy Note 8
– Added support for some old series : SM-J500F, SM-J500FN, SM-J500G
– Added support for some old series : SM-J500H, SM-J500M, SM-J500N0
– Added support for newest firmware version SM-G550T1

Version 1.35.0

– World’s First: Support for Latest versions of SM-J700x (Without ROOT or Downgrade)
* Added support for newest FW version J700FXXU4BQH1 SM-J700F (DD,DS)
* Added support for newest FW version J700HXXS3BQF3 SM-J700H (HD)
* Added support for newest FW version J700MUBU2BQH1 SM-J700M (MD)
* Added support for newest FW version J700PVPS1AQF3 SM-J700P
* Added support for newest FW version J700TUVS3AQF1 SM-J700T
* Added support for newest FW version J700TUVS3AQF1 SM-J700T (T1)
– World’s First: Added Reading Codes in UPLOAD MODE for MTK series (SM-G532)
– Added FAST CODE READING for SpreadTrum series

Version 1.34.0

– Speed of reading data increased (2x faster)
– Added support for SC-04G, SC-V31, SC-V33, SC-V34, 404SC (newest FW)
– Added support for newest FW versions SM-J327Rx, SM-J327P
– Added support for newest FW version SM-N915A(DQG), SM-N915F(DQH)
– Security error (E1065) has been Fixed.

Version 1.29.0

– Added support for newest Japanese series (Docomo):
– Added support for SC-02H
– Added support for SC-02J (World’s first)
– Added support for SC-03H (World’s first)
– Added support for SC-03J (World’s first)
– Added support for SM-G9298 (World’s first)
– Added support for SM-C7018
– Added support for SM-C5018

Silakan download software SamKEY dan Drivernya disini http://samkey.org/download.html

 

beli SAMKEY instant disini https://yogyaponsel.com/teknisihp/?s=samkey&post_type=product

(Visited 76 times, 1 visits today)

Comments

comments

Published by

www.delingo.id

www.delingo.id

Leave a Reply