Octoplus/Octopus Suite v.1.5.7 Release

Octoplus/Octopus Suite v.1.5.7 is out! Added Read Codes via server for Galaxy S9/S9+ based on Exynos CPUs and more!

Added Read Codes (via server) for Samsung Galaxy S9, S9+, A6 2018, J4, J6 2018 series based on Exynos CPUs.

Added new additional Read Codes (via server) method for latest Exynos CPUs-based devices: S8/S8+, Note 8, A8/A8+ 2018, A3/A5/A7 2017, J7 2017/Nxt/Prime series.

Octoplus/Octopus Suite v.1.5.7 Release Notes:

Added support for the following models:
SM-G960F – added Read Codes (via server)
SM-G960N – added Read Codes (via server)
SM-G965F – added Read Codes (via server)
SM-G965N – added Read Codes (via server)
SM-A600F – added Read Codes (via server)
SM-A600FN – added Read Codes (via server)
SM-A600G – added Read Codes (via server)
SM-A600GN – added Read Codes (via server)
SM-A600N – added Read Codes (via server)
SM-J400F – added Read Codes (via server)
SM-J400G – added Read Codes (via server)
SM-J400M – added Read Codes (via server)
SM-J600F – added Read Codes (via server)
SM-J600FN – added Read Codes (via server)
SM-J600G – added Read Codes (via server)
SM-J600GF – added Read Codes (via server)
SM-J600GT – added Read Codes (via server)
SM-J600L – added Read Codes (via server)
SM-J600N – added Read Codes (via server)

Added new additional Read Codes (via server) method for the following Exynos CPU-based devices (all firmwares and KNOX are supported, no root required):
SM-A320F, SM-A320FL, SM-A320Y
SM-A520F, SM-A520K, SM-A520L, SM-A520S, SM-A520W
SM-A530F, SM-A530N, SM-A530W
SM-A720F
SM-A730F, SM-A730N
SM-G950F, SM-G950FD, SM-G950N, SM-G955F, SM-G955FD, SM-G955N
SM-J530F, SM-J530FM, SM-J530G, SM-J530GM, SM-J530K, SM-J530L, SM-J530Y, SM-J530YM
SM-J730F, SM-J730FM, SM-J730G, SM-J730GM, SM-J730K
SM-N950F, SM-N950FD, SM-N950N

Note: Read Codes (via server) operation for all mentioned above devices works for most available device firmwares (modems). If your device has unsupported modem, just write another available firmware or proper supported modem. Or wait a few hours and try to repeat the operation again – support for unsupported modem firmware will be added to server automatically during a few hours.

Added new additional Read Codes method for SM-G950x and SM-G955x, based on Qualcomm CPUs. From now on, two Read Codes methods are supported – Read Codes (Via DIAG port) and Read Codes (Via ADB interface). If Read Codes operation was unsuccessful by using the first method, try to perform it using the second Read Codes method.

You can buy Octopus/Octoplus Server Credits from yogyaponsel.com

How to perform “Read Codes” operation:
Select proper model from the list in the Software
Install Samsung ADB drivers
Connect the device to PC via USB cable
Enable ADB
Press “Read Codes” button

sumber informasi http://forum.gsmhosting.com/vbb/f699/octoplus-octopus-suite-v-1-5-7-out-2448612/

(Visited 10 times, 1 visits today)

Comments

comments

Published by

www.delingo.id

www.delingo.id

Leave a Reply